- Wrinkling After Fusing Viscose Fabric with Fusible Interlining May Not Be a Fabric ProblemRelease on 2026-07-03
- Wrinkling after fusing viscose fabric with fusible interlining is not necessarily a quality issue with the fabric. Whether the wrinkles appear immediately after pressing, or only after washing or ironing, leads to completely different diagnostic directions. The cause should not be attributed solely to the fabric. Read More
- Choosing Interlinings: Beyond Just Weight.Release on 2026-06-30
- Linings labeled with the same 80 g/m² weight, when fused to different fabrics, may result in stiff hand feel, insufficient support, post-wash wrinkling, or poor fusing adhesion. When selecting interlinings, weight only indicates the mass per unit area and cannot be directly equated to the final garment effect. Read More
- Interlining Coating Is Not Just About Applying a Layer of Adhesive – There Are These Details to ConsiderRelease on 2026-06-27
- Interlining may look like just a piece of backing material with a layer of glue, but once pressed onto fabric, issues such as strike-through, stiffening, blistering, or unevenness after washing can occur. The problem is not necessarily about whether the adhesive "sticks firmly" – coating details often determine which fabric, which garment part, and which process it suits. Read More
- Interlining Hand Feel Selection: The Right Part, the Right Hand Feel.Release on 2026-06-23
- In the garment industry, terms like "softer," "firmer," "with bone structure," and "not stiff" actually correspond to different handle requirements for interlinings in different parts of a garment. The collar, placket, front panel, and waistband cannot use the same interlining; if matched incorrectly, it can easily lead to stiffness, collapse, post-wash wrinkling, or unnatural garment lines. Read More
- Soft Placket and Collar Collapse? A Guide to Selecting Interlinings for Lightweight Summer Women's FabricsRelease on 2026-06-15
- For summer women's wear, lightweight fabrics often lead to issues such as a non-crisp placket, collar collapse, and wrinkling after washing. These are often related to the choice of interlining and the control of the fusing process. Judging whether an interlining is suitable cannot rely solely on its hand feel (soft or hard); it must be evaluated in combination with the fabric's characteristics, the application area, and post-production testing. Read More
- Why are lightweight fabrics prone to static electricity?Release on 2026-06-13
- Lightweight spring/summer fabrics used for shirts, dresses, or light jackets often suffer from static-related issues such as attracting dust, clinging to the body, and skirts wrapping around the legs. When selecting anti-static interlinings, one should not rely solely on the "anti-static" label; instead, the fabric thickness, drape, ironing performance, and behavior after washing should all be considered together. This article starts from the principle of static electricity and combines it with interlining technology to help you avoid common pitfalls. Read More
- How exactly do you use double-sided adhesive tape?Release on 2026-06-08
- Double-sided adhesive tape is often used on garment parts where reducing visible stitches, keeping edges flat, or assisting bonding is needed. However, not all fabrics or locations are suitable. Areas such as hems, cuffs, plackets, facings, and pocket openings differ in terms of stress, thickness, and changes after washing. Before choosing, first evaluate the specific use scenario. Read More
- Casual Women's Wrinkles Easily with Fusible Interlining? Here’s WhyRelease on 2026-06-05
- "In June, casual women's wear often uses lightweight, soft, or stretchy fabrics; after fusing interlining, wrinkles tend to appear at areas such as plackets, collars, cuffs, and pocket flaps. When solving the problem, the cause should be determined based on the timing and location of the wrinkling, with focus on interlining hand feel, thermal shrinkage, shrinkage difference, and local structural stress." Read More
- Why Does Interlining Bond Poorly and Wrinkle After Pressing in Hot, Humid Weather?Release on 2026-06-01
- Under hot, humid conditions, poor interlining bonding is often caused by insufficient adhesive dot melting due to fabric moisture content; wrinkling after pressing is mostly due to mismatches in shrinkage and elasticity between the fabric and the interlining. One should first determine whether the problem is "failure to stick" or "deformation after sticking," and then address it accordingly. Read More
- Analysis of Sportswear Fabric Development: How High-Elasticity Materials Achieve Extreme Stretch and Stable Support?Release on 2026-05-29
- "The core of sportswear development lies in balancing extreme stretch with stable support. Using high-recovery fabric as the base, combined with warp-knitted elastic interlining to build an invisible skeleton, and complemented by precision techniques such as seamless bonding, is the only way to achieve a professional experience that retains its shape even after prolonged wear and adapts seamlessly to both dynamic and static states." Read More
- Application of Adhesive-Free Composite Floating Fabric in Summer Dresses and Pattern Making SuggestionsRelease on 2026-05-25
- "Adhesive-free composite floating fabric retains the fabric's original softness and breathability through physical heat pressing, simplifies production processes, and when paired with an alkali-reduced polyester silk-like lining, balances skin-friendliness and cost, providing a light and efficient solution for summer dresses." Read More
- Summer Commuting Shirt Dress Development: How to Balance a Crisp Collar Band with Lightweight Fabric?Release on 2026-05-23
- How to balance a crisp collar band with lightweight fabric for a summer shirt dress? This article analyzes the solution for balancing lightweight support and long-term flatness from three aspects: interlining weight, anti-glue-bleeding silk-specific interlining, and shrinkage matching. Read More
